Discover Economic Benefits at Home with NinjaFlex TPU 3D Printer Filadent

Application: Various flexible household products
Material used: NinjaFlex^® 3D Printer Filament
Industry: Education, Hobbyist

Aubrey L. Woern and Joshua M. Pearce of Michigan Technological University recently shared an article they published, titled “Distributed Manufacturing of Flexible Products: Technical Feasibility and Economic Viability.”

Their studies showed that NinjaFlex filament provides a cost-effective solution for distributed home-scale manufacturing of flexible applications.

Abstract: Distributed manufacturing, even at the household level, is now well established with the combined use of open-source designs and self-replicating rapid prototyper (RepRap) 3D printers. Previous work has shown substantial economic consumer benefits for producing their own polymer products. Now flexible filaments are available at roughly three times the cost of more conventional 3D printing materials.

To provide some insight into the potential for flexible filament to be both technically feasible and economically viable for distributed digital manufacturing at the consumer level, this study investigates 20 common flexible household products.

The 3D printed products were quantified by print time, electrical energy use and filament consumption by mass to determine the cost to fabricate with a commercial RepRap 3D printer. Printed parts were inspected and when necessary tested for their targeted application to ensure technical feasibility.

Then the experimentally measured cost to DIY manufacturers was compared to low and high market prices for comparable commercially available products. In addition, the markup and potential for long-term price declines were estimated for flexible filaments by converting thermoplastic elastomer (TPE) pellets into filament and reground TPE from a local recycling center into filament using an open-source recyclebot.

“This study found that commercial flexible filament (like NinjaTek TPUs) is economically as well as technically feasible for providing a means of distributed home-scale manufacturing of flexible products. The results found a 75% savings when compared to the least expensive commercially equivalent products and 92% when compared to high market priced products.”

Roughly, 160 flexible objects must be substituted to recover the capital costs to print flexible materials. However, as previous work has shown the Lulzbot Mini 3-D printer used in this study would provide more than a 100% ROI printing one object a week from hard thermoplastics, the upgrade needed to provide flexible filament capabilities can be accomplished with 37 average substitution flexible prints. This, again easily provides a triple-digit return on investment printing one product a week.

Although these savings, which are created by printing objects at home are substantial, the results also have shown the savings could be further increased to 93% when the use of a pellet extruder and TPE pellets, and 99% if recycled TPE filament made with a recyclebot is used. The capital costs of a recyclebot can be recovered in the manufacturing of about 9 kg of TPE filament, which can be accomplished in less than a week, enabling improved environmental impact as well as a strong financial return for heavy 3D printer users.

Read Full Story