Skip to content

Features and Benefits of colorFabb PA Filament

PA-CF Low Warp

The PA-CF Low Warp 3D printer filament is a one-of-a-kind polyamide formulation with the ability to print nearly warp free on non-heated build platforms. PA-CF Low Warp material excels in tensile and impact strength due to its infusion of carbon fiber.

  • Infused with carbon fiber for increased stiffness. Due to carbon fiber’s abrasive nature, these fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. Use wear-resistant nozzles, such as the E3D hardened steel nozzle or Olsson Ruby nozzle.
  • Low infill prints come out perfectly flat on cold bed. For higher infill prints 40/50°C temperature is enough to obtain flat prints.
  • PA-CF Low Warp excels in tensile and impact strength and allows continuous use at 120°C while retaining sufficient mechanical properties.
  • Diameter tolerance: ± 0.1 mm
  • Density: 1.14 g/cm3
  • Continuous Service Temperature: 120°C

PA-CF Low Warp

Extruder Temperature

  • 260°C to 280°C

Platform Temperature

  • Room temperature to 50°C

Print Speed

  • 30-40 mm/sec

Cooling Fan

  • 50% fan cooling is a good starting point to give the best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.

Tech Specs

PA-CF Low Warp

Explore colorFabb’s specialty 3D printing filament blends of low-warp polyamides.

Category
Diameter
Spool Weight
Color

3D Printing Filament colorFabb PA - Black - 1.75mm - 0.7kg

Product #8719033556218

This item is on backorder.
Shipping may be delayed.

Price
$54.95

Fenner Inc.
311 W Stiegel St.
Manheim, PA 17545 USA

1-717-664-8254
[email protected]