3D Printed Safety Shroud Prevents Wasted Material and Safety Hazard
The auto coiler on the Fenner Drives extrusion line uses large bolts as feet, to support and level the equipment. During the beginning stages of production the extruded material would collect on the floor in preparation for spooling. Often the material would snag on the exposed hardware.
This situation caused a number of safety hazards. If the material would ever get wound too tightly, it could cause enough tension that the material would snap. This would result in the material whipping around the shop potentially harming employees.
The standard solution for this fixed would require ordering a replacement foot, designed to not have the open bolt. This part would have cost the company $150, and would have taken at least a week to be delivered.
The NinjaTek 3D printing department came up with a design that created a cover for the problem bolt, using Armadillo semi-rigid TPU filament. The 3D printed solution cost $32 and took only 1 day to print. The 3D printed protective case saved the company time and money and yielded less scrap material during production.
“Once again the 3D printed solution saved our team time and money”SHOP ARMADILLO »
Example of the 1.25” bolt with a 2.5“ head. The cover was designed to have a removable top.
LAYER THICKNESS: 0.3mm